Bellfires VERTICAL BELL SMALL 3 CF Instructions For Use & Manual Daily Maintenance page 17

Bellfi res
AM
PM
ON
OFF
1 2
Note
Change from one-button to two-button ignition operation by pressing
and holding
ON is displayed and 1 is fl ashing. When change is complete 1 will
change to 2.
AM
PM
ON
OFF
1 2
Note
Change from two-button to one-button ignition operation by pressing
and holding
ON is displayed and 2 is fl ashing. When change is complete 2 will
change to 1.
Instructions for use
Hand-Held Transmitter One-Button Operation
(Default Setting)
• Press
blinking series of lines confi rms the start
sequence has begun; release button.
• Main gas fl ows once pilot ignition is confi rmed.
• Hand-held transmitter automatically goes into
Manual Mode after main burner ignition.
button for 10 sec. immediately after installing batteries.
Hand-Held Transmitter Two-Button Operation
• Press
two short beeps and a blinking series of lines
confi rms the start sequence has begun; release
buttons.
• Main gas fl ows once pilot ignition is confi rmed.
• Hand-held transmitter automatically goes into
Manual Mode after main burner ignition.
button for 10 sec. immediately after installing batteries.
button until two short beeps and a
and button simultaneously until
English
17