Table of Contents
Advertisement
Figure 73 Sender Info expanded
Email address: Type the email address of the email account to be used as the sender for outgoing
email alerts.
Username: Type the user name of the email account.
Password: Type the password of the email account.
Protocol Alert Settings screen
Purpose: To set up notifications to be displayed on the touchscreen whenever Magnis protocol
updates are available from Agilent. See instructions in
"Set up alerts for notification of new
protocols"
on page 34.
To open: From the Home screen, press Settings. On the Settings screen press Connectivity
Settings. Then press Protocol Alert Settings.
Figure 74 Protocol Alert Settings screen
Enable new protocol update alert
Mark the check box to enable notifications for protocol updates. The bell-shaped notification icon
is red when a protocol update is available for download and the system is ready to download a
protocol (i.e., the system is not busy performing another function). Pressing the red icon opens
the
Protocol Update
screen. Note that the alerts require an internet connection.
Clear the check box to disabled notifications.
Close
This button returns you to the Settings screen.
Magnis and MagnisDx NGS Prep System User Guide
91
Advertisement
Table of Contents
