Table of Contents
Advertisement
easy-Drive 200R
November 2023
Actuator Mounting Configuration (Figure 21)
Position 1 is preferred for both right or left hand mounted options. This has the conduit ports facing down below the
centerline of the valve body, and the 210.1 mm (8.72 in) dimension of the actuator above the centerline of the valve,
in either configuration. A vertical mounted orientation may be used if desired but may not be recommended for the
trim wear of the intended valve assembly.
Note
Refer to the Instruction manual of the valve body to determine which position the valve can be oriented for optimal performance
and life of trim parts.
26
Instruction Manual
D104742X012
Advertisement
Table of Contents
