RDZ WHR 400 Installation & Technical Manual page 17

Air handling units
Hide thumbs Also See for WHR 400:
Table of Contents

Advertisement

High noise level
Rumorosità elevata
High vibrations Vibrazioni
elevate
Condensation leakage
Perdita di condensa
Noise from the unit
Rumore proveniente dall'unità
Noise from ducts
Rumore proveniente dai condotti
Vibrating panels
Pannelli che vibrano
Unbalanced fan blades
Pale dei ventilatori squilibrate
Clogged condensate drain
Scarico condensa intasato
Condensate does not flow from the
drain into the collection tray
La condensa non fluisce dal condotto
di scarico nel vassoio di raccolta
Check for cracks and/or air leaks from unit panels;
Check the integrity of the blades;
Clean the fans;
Check that the metal clips balancing the blades have not
been detached;
Verificare la presenza di fessure e/o di fuoriuscite d'aria
dai pannelli dell'unità;
Verificare se i motori girano liberi/correttamente;
Regolare la velocità dei ventilatori;
Check suction/intake/exhaust ducts for cracks;
Verificare la presenza di fessure sui condotti di aspirazione/
immissione/espulsione;
Check the integrity of the panels and the tightness of the
screws;
Check the correct closing of the unit covers;
Check that the unit's panels are not in contact with the walls;
Verificare l'integrità dei pannelli e il serraggio delle viti;
Verificare la corretta chiusura del/i coperchio/i dell'unità;
Verificare che non ci siano pannelli a contatto con le pareti;
Check the integrity of the blades;
Clean the fans;
Check that the metal balancing clips on the fan blades have
not come detached;
Verificare l'integrità delle pale;
Pulire i ventilatori;
Verificare che non si siano staccate le clip in metallo
presenti sulle pale dei ventilatori per il bilanciamento
delle stesse;
Clean the condensate drain;
Pulire lo scarico condensa;
Check that the unit is perfectly level;
Check that the condensate drain pipes are intact (especially
between the unit and the siphon);
Check that the siphon is of the correct height;
Verificare che l'unità sia perfettamente piana;
Controllare che i condotti dello scarico condensa siano
integri (in particolare tra l'unità e il sifone);
Verificare che il sifone sia dell'altezza corretta;
17 17

Advertisement

Table of Contents
loading

Table of Contents