For your own safety, please read this user manual carefully before you initially start-up.
INTRODUCTION
Thank you for having chosen
will enjoy this device for a long period of time.
Features:
*36 pcs high power 1W LEDs, RGB color mixing
*Either sound-controlled or via DMX
*5 DMX channels
*Stand-alone operation with master/slave
OPERATION
Manual Mode (fixed color, w/o color changing w/o chasing)
1. Link up more than 2 units or more and set Master and Slave
Master: DIP switch 8 ON, the others at OFF
2. To set color by setting dip switches of Master unit:
DIP 1 ON: Red LED at medium brightness;
DIP 2 ON: Red LED at high brightness;
DIP 3 ON: Green LED at medium brightness;
DIP 4 ON: Green LED at high brightness;
DIP 5 ON: Blue LED at medium brightness;
DIP 6 ON: Blue LED at high brightness;
※ All linked slave units' color will be same as master unit
※ The above settings cannot work with DMX controller.
※ When two or more LEDs are in serial, settings applies to Master only. DO NOT make any settings on Slaves.
Otherwise, there will be unexpected color changing.
※ DO NOT set DIP switch 8 at ON.
Sound-active Mode
Master: set the master unit: Set DIP 8 at ON, the others at OFF
When DIP 7 at ON, Colour hard changing with strobe by bass will be active
When DIP 8 at ON, Colour hard changing without strobe by bass will be active
Slave: set DIP switch 1 and 10 at ON
Built-in Chases Mode
1. To set Master and Slave
Master: DIP switch 9 at ON
※ Built-in chases mode can be run a link consists of 4 pcs of units.
2. To set built-in chase by setting DIP switch 1-3 of the Master.
LED SPOT80
USER MANUAL V1.0 EN
LED
SPOT80. If you follow the instructions given in this manual, we are sure that you
Slave: DIP switch 9 at OFF, 10 at ON
CAUTION!
Keep this device away from rain and
Unplug mains lead before opening the
Slave: DIP switch 1 and 10 at ON
moisture!
housing!