Inogen Rove 6 User Manual page 8

that has an Underwriters Laboratory (UL) Mark
and a minimum wire thickness of 18 gauge.
Do not connect any other devices to the same
extension cord.
• Do not repackage concentrator, accessories, or
systems for shipment in packaging not provided
by Inogen.
• Do not jump start the automobile with the DC
power cord connected. This may lead to voltage
spikes which could shut down and/or damage
the device.
• Do not leave the device in an environment
which can reach high temperatures, such
as an unoccupied car in high temperature
environments.
• Do not touch the recessed electrical contacts
of the External Battery Charger; damage to
contacts may affect charger operation.
• The device should be kept dry at all times.
Exposure to water could lead to electrical shock
and/ or damage.
• For optimal sieve bed (columns) life, the product
should be used frequently.
• The device's battery acts as a secondary power
supply in the event of a planned or unexpected
loss of the external power supply. Even when
operating the device from an external power
supply, a properly inserted battery should be
maintained in the unit. Doing so will minimize
the risk of interrupting operation and will keep
alarms functioning.
©2023 Inogen, Inc. All rights reserved.
• The power supply should be placed in a
well-ventilated location as it relies on air
circulation for heat dissipation. The power
supply may become hot during operation; if this
happens, allow to cool down before handling to
avoid injury.
• Ensure the automobile power socket is clean
and the adapter plug fits properly, otherwise
overheating may occur.
• Ensure that the automobile power socket is
adequately fused for the device power
requirement (minimum 15Amp). If the power
socket cannot support a 15Amp load, the fuse
may blow, or the socket may be damaged.
• When powering the device in an automobile,
ensure the vehicle's engine is running first
before connecting DC power cord into DC
auxiliary outlet. Operating the device without the
engine running may drain the vehicle's battery.
• A change in altitude (for example, from sea level
to mountains) may affect total oxygen available
to the patient. Consult your physician before
traveling to higher or lower altitudes to
determine if your flow setting should be
changed.
Page 8 of 40 96-13115-00-01 B