Inogen Rove 6 User Manual page 20

7.4 INFORMATIONAL ICONS
The following displayed icons are not accompanied by any audible feedback or any visual change in the
indicator lights.
Display Icons Description & Action (if needed)
Flow setting: "X" represents the selected flow setting (e.g., setting 2).
Please wait indicator: This symbol will appear while the concentrator starts up.
Following a brief start-up sequence, a warmup period up to 2 minutes will initiate.
During this time-period the oxygen concentration is building to but may not have
reached specification.
Time remaining on battery charge: "HH:MM" represents the approximate time
remaining on the battery charge in hours:minutes (e.g., 1:45).
Battery charge and charging status: This symbol indicates that the battery is installed
and is charging. For a complete list of battery charging symbols, see 'charging the
battery with the concentrator' (section 6.8).
Battery level status: This symbol indicates the battery level (about 50% in this
example). Refer to 'checking the battery status when installed on the device'
(section 6.6).
Battery % charged: This symbol will be displayed when the concentrator is plugged
in and is being used to charge a battery (not being used for oxygen production). It
is normal to see a fully charged battery read between 95% and 100% when external
power is removed. This feature maximizes the useful life of the battery.
Sieve (columns) reset: This symbol is displayed when column maintenance is
required and once the replacement columns have been installed.
Sieve reset success: This symbol is displayed once the sieve columns have been
successfully reset.
Data log transfer in progress or update in progress (app only): This icon is displayed
during all data log transfers and software updates initiated through the Inogen
Connect App.
Data log transfer success (app only): This icon is displayed after data log transfers
have been successfully completed through the Inogen Connect App.
The following displayed icons are accompanied by a single, short beep.
Please wait, shutting down: Power button has been pressed for 2 seconds.
Concentrator is performing system shut down.
Life Clock (HH:MM), software version & serial number display (Vx.x:SN):
The Life Clock, software version & serial number will be displayed when the
'No-breath-detect' audible alarm button (bell button) has been pressed for five
seconds while the concentrator is running.
©2023 Inogen, Inc. All rights reserved. Page 20 of 40 96-13115-00-01 B