General Safety Instructions - Cocraft HC85 Original Instructions Manual

Chainsaw Sharpener
Art.no 18-3057
30-9678
Please read the entire instruction manual before using and save for future use. We apologise for
any text or photo errors and any changes of technical data. If you have any questions concerning
technical problems please contact our Customer Service Department (see address on reverse.)
Safety

General Safety Instructions

Warning:
When using this tool all basic safety precautions must be followed to avoid the risk of fire,
electrocution and personal injury. Read these instructions carefully before using the product
and keep them for future reference.
• Keep the working area clean. Cluttered areas and benches invite accidents.
• Consider your work area environment. Do not expose the tool to rain. Do not use the tool
in moist or wet areas. Keep the working area well lit. Never operate the tool near flammable
liquid or gas.
• Avoid electric shocks. Avoid body contact with earthed objects, such as pipes, radiators,
ovens or refrigerators.
• Keep other people at a safe distance. Do not allow anyone not involved in the work process
to touch the tool or its electric cable, especially children. Keep all bystanders at a distance.
• Store the tool in a safe place. When your tools are not in use, keep them in a locked, dry
area, away from children.
• Do not overload the tool. The correct feed rate makes the tool work better and safer.
• Use the correct tool for the job. Do not try to use small tools to perform jobs requiring more
powerful tools. Do not use a tool for a purpose for which it was not designed, e.g. using
a circular saw for lopping branches off trees.
• Wear suitable clothing. Do not wear loose-fitting clothing or jewellery, that could get caught in
moving parts. Non-slip shoes are recommended for outdoor work. Wear a hairnet or similar if
you have long hair.
• Always use safetywear. Wear safety glasses. Use a face mask or dust filter when working in
dusty environments.
• Use dust extractors. If the tool is equipped with or connected to a dust extractor/collector,
make sure that it is turned on and used correctly.
• Do not abuse the lead. Do not jerk the lead, grip the plug itself when disconnecting the power.
Make sure that the mains lead does not come into contact with heat, oil, or sharp edges.
• Firmly secure the workpiece. If possible use vices or clamps to hold the workpiece in place.
This is much safer than holding the workpiece in one hand.
• Do not overreach. Make sure that you stand steady and balanced all times.
Model 2002-UK
2002
3