Before Starting The Machine - Cocraft HC85 Original Instructions Manual

Before Starting the Machine

• Make sure that the power switch is set on 0 before connecting the machine to a wall socket.
Only connect the machine to an earthed wall socket.
• Make sure that the grinding wheel is well centred and undamaged and that the guard is
attached and intact before use.
• Use only grinding wheels with the correct diameter and which are approved for the speed of
the machine.
• Protect the grinding wheel from moisture and blows.
• Make sure that the grinding wheel can rotate freely before starting the machine.
• Always pull the plug out of the wall socket before servicing and adjusting the chainsaw sharpener.
Whilst Operating the Machine
• Pull out the plug if the machine is left unattended.
• Stand steady and hold the machine firmly in both hands.
• Keep an eye on the electric cable whilst using the machine so that it is not damaged by
the grinding wheel or the sharp edges of the chain.
• Grip the chain securely in the vice before starting to grind.
• Do not use the machine around flammable materials. The grinding process causes sparks
which can ignite fires or explosions.
• Position the sharpener below eye level in a well-lit place.
• Wait until the grinding wheel arm is completely raised before feeding the chain forward to
the next link.
• Bear in mind that the links of the chain are sharp, keep fingers well clear when feeding
the chain forward to the next link.
• This sharpener is only intended for sharpening chainsaw chains, the grinding or cutting of items
other than these chains is not permitted. Do not use grinding tools other than grinding wheels.
Turn the machine off immediately if...
• The machine starts to behave strangely, e.g. emits smoke, sparks, strange noises or starts
vibrating.
• The machine's power switch or electric cable is damaged.
Product safety symbols and their meaning
Read the entire instruction manual before using the product.
Always use safety glasses. Always use ear protection.
5