On/Off Switch/Speed Regulator; Ccessories; Operation; Hints For Car Lacquer Care - Westfalia 92 86 57 Original Instructions Manual

For checking the battery level status, insert
the battery into the polisher and turn on.
ON/OFF Switch and Speed Controller
Use the ON/OFF switch (1) to turn the machine on and off.
Use the speed regulator (2) to set the speed as required. In the
setting 1 the unit will rotate with approx. 2500 rotations per
minute. In the setting 5 the unit will rotate with max. 5000
rotations per minute.
Accessories
The polisher is supplied with a two sponges and two sanding
paper discs

Operation

1. Use the appropriate accessory to the right job and fully press
down on the hook and loop disc.
2. Adjust the speed controller (2) to the desired speed. Always
start with the lowest rotation speed in order to avoid splashes
when applying polish on the surface.

Hints for Car Lacquer Care

Lacquer Cleaner (contains abrasive ingredients)
A lacquer cleaner should only be used for very weathered
lacquered surfaces, as they contain "coarse" abrasive particles.
Polish (contains abrasive ingredients)
Many different kinds of polish are available on the market, e.g. for
newly lacquered surfaces, for matt finish and "weathered"
lacquers, combination products with hard wax (for protection) are
all available.
None of these products should be used too frequently as they
contain abrasive particles, which remove parts of the existing
lacquer layer with each use.
Operating
15