Battery Level Indicator; On/Off Switch/Speed Regulator; Attaching The Accessories - Westfalia 85 55 30 Original Instructions Manual

Battery Level Indicator

The 3 LEDs indicate the battery level of the
built-in battery.
1 LED: = 30% +/-5% capacity
2 LEDs: = 60% +/-5% capacity
3 LEDs: = 90% +/-5% capacity
For checking the battery level status, insert
the battery into the polisher and turn on.
ON/OFF Switch/Speed Controller
The ON/OFF switch (2) is also the
speed regulator.
1. To turn on the polisher turn the
speed controller to the left. In the
setting 1 the unit will rotate with
approx. 1200 rotations per minute.
In the setting 5 the unit will rotate
with max. 3000 rotations per mi-
nute.
2. To reduce the speed, turn the speed controller in direction 1.
To switch off the polisher turn the speed controller to the
position O.

Attaching the Accessories

The polisher is supplied with a sponge, a sanding paper disc a
lambskin buffing pad and a terrycloth pad.
The terrycloth pad can be used to apply either polish or abrasive.
The buffing pad can then be used to polish the surface.
Always make sure that there are no dirt particles in the fabric
before starting your work. Dirt particles can cause scratches on
the surface being polished.
Operating
16