Elgar TrueWave TW 5550 Operation Manual page 8

TW 3700 • TW 5550
3.10.14 Recall Factory Configuration .......................................................... 3-19
3.10.15 Specify LOCAL Sense.................................................................... 3-20
3.10.16 Specify REMOTE Sense ................................................................ 3-20
3.10.17 Place TW into PLL Lock Mode ....................................................... 3-21
3.10.18 Program Sync Connector to Send a Pulse
at Phase A Zero Crossing .............................................................. 3-21
3.10.19 Program TW Amp Gains to Respond to
Control BNC Connector.................................................................. 3-22
3.10.20 Specify TW Installed Amps Qty...................................................... 3-22
3.10.21 Place TW into Parallel Amplifiers Mode ......................................... 3-23
3.10.22 Set Password ................................................................................. 3-23
3.10.23 Clear Password .............................................................................. 3-24
3.11 Master/Slave Operation.................................................................................. 3-25
3.11.1 Overview.......................................................................................... 3-25
3.11.2 Master/Slave: Step by Step Instructions.......................................... 3-25
3.11.3 Return to Standalone Operation...................................................... 3-28
S E CT I ON 4 - MAI NT E NANCE
4.1 Periodic Service................................................................................................ 4-1
AP P E NDI X A
Fault Operations.........................................................................................................A-1
L I S T OF T AB L E S
Table 2-1 Recommended Mounting Slide............................................................. 2-2
Table 2-2 TW Input/Output Connectors................................................................ 2-6
Table 2-3 DFI Connector Pinout ........................................................................... 2-7
Table 2-4 IEEE 488.2 Connector Pinout............................................................... 2-8
Table 2-5 RS-232 Connector ................................................................................ 2-8
Table 2-6 Input Currents for 3-Phase Input Power ............................................... 2-9
Table 2-7 Single-Phase Input Configurations ..................................................... 2-10
Table 2-8 Recommended Wire Gauge Selection Guide..................................... 2-14
Elgar TrueWave
Contents
vii