S E Ct I On 2 I Ns T Al L At I On; Introduction; Unpacking; Pre-Installation Inspection - Elgar TrueWave TW 5550 Operation Manual

S E CT I ON 2
2 .1 I NT R ODU CT I ON
The Elgar TW 3700 or TW 5550 has been fully calibrated and tested prior to shipment.
The instrument is ready for immediate use upon receipt.
WAR NI NG! The TrueWave unit weighs 89–115 lbs. (40–52 kg),
depending on the model. A minimum two–person lift is required!
WAR NI NG! Hazardous voltages are present when operating this
equipment. Please read the Safety Notice at the beginning of this
manual prior to installation, operation, or maintenance.
2 .2 U NPACK I NG
Perform a visual inspection of the shipping container prior to accepting the package
from the carrier. If extensive damage to the shipping container is evident, a description
of the damage should be noted on the carrier's receipt and signed by the driver of the
carrier agent.
If damage is not apparent until the instrument is unpacked, a claim for concealed
damage should be placed with the carrier. In addition, the shipping container(s) and
filler material should be saved for inspection. Forward a report of damage to the Elgar
Service Department. Elgar will provide instructions for repair or replacement of the
instrument.
If the instrument needs to be returned to Elgar, suitable shipping containers and
packing materials must be used. If proper packing material is not available, contact
Elgar to provide containers and shipping instructions.
2 .3 P R E -I NS T AL L AT I ON I NS P E CT I ON
Perform a visual inspection of the instrument when it is removed from the shipping
container. Check for shipping damage such as dents, scratches, distortion, and
damaged connectors.
Elgar TrueWave
I NS T AL L AT I ON
2-1