Table of Contents
Advertisement
Error
Number
Error Cause
82
This error indicates an attempt was made to change the contents of
FLASH memory without properly enabling FLASH writes.
83
This error indicates that the FLASH memory directory is full and an
attempt to write to the FLASH memory occurred. If this occurs, delete
some items from FLASH memory and repeat.
84
This error indicates an attempt was made to access an item in the
FLASH memory that does not exist.
85
This error indicates that an attempt was made to access an item that is
in the FLASH memory, but hasn't been properly opened for access.
86
This error indicates that the archive data type is not one of the data
formats supported. This error can result from trying to archive a data
set that has not been properly stored.
87
The data to be archived must be NON-REALTIME data. Real time data
cannot be archived. This error results when trying to archive real time
data.
88
This error results when an attempt is made to archive data during
sampling. Archive operations must occur only when the unit is idle.
97
This error indicates an attempt to use a channel that does not exist on
CLB2 (for example, channel 42).
98
This error indicates an undefined error has occurred.
99
This error indicates that the current load on the analog or digital ports
is more than can be supplied by the unit and the power has been
turned off to prevent damage. Do not attempt to restart sampling
until the problem has been corrected.
B-4
CBL 2 Technical Reference
Advertisement
Table of Contents
