Table of Contents
Advertisement
Syntax: {1,11, operation,post-processing,(delta)
Use this syntax to set up the sonic channel.
Operation
0 = Resets channel
1 = Meters – Returns distance and
@time (RT and NON-RT)
2 = Meters – Returns distance and
@time (RT and NON-RT)
3 = Feet – Returns distance and @time
(RT and NON-RT)
4 = Meters – Returns distance, velocity,
and @time (RT) or distance and @time
(NON-RT)
5 = Feet – Returns distance, velocity,
and @time (RT) or distance and @time
(NON-RT)
6 = Meters – Returns distance, velocity,
acceleration, @time (RT) or distance
and @time (NON-RT)
7 = Feet – Returns distance, velocity,
acceleration, @time (RT) or distance
and @time (NON-RT)
1
This parameter is ignored.
2
RT: REALTIME mode sampling.
3
NON-RT: NON-REALTIME mode sampling.
Note: When post-processing is enabled in non-realtime sampling mode, all operations will
return the first derivative and the second derivative.
Syntax: {1, channel , operation }
Use this syntax to set up the digital input channel.
Channel
21 = Digital Input
CBL 2 Technical Reference
Operation
0 = Off
1 = On
1
,equ }
Post-Processing
2
0 = None (RT
3
and NON-RT
)
1 = d/dt (NON-RT)
2
2
2 = d/dt and d
/dt
(NON-RT)
Conversion Equation
0 = Off
1 = On (must also send
Command 4 for
temperature
compensation)
25
Advertisement
Table of Contents
