Command 117 Check Short Sensor Name; Command 1998 Set Led Command; Command 1999 Sound Command - Texas Instruments CBL 2 Reference Manual

Command 117
Syntax: {117, channel }
Channel
1, 2, 3, 11
This command returns the following information:
short sensor name

Command 1998 Set LED Command

Syntax: {1998 ,P1,P2 }
P1
1 = Red LED
2 = Yellow LED
3 = Green LED
Note: Leaving a LED turned on will run down the batteries in the CBL 2.

Command 1999 Sound Command

Syntax: {1999, length
Length
Sound stays on this long (in
100ms steps)
Note: You can enter up to 32 pairs of values.
CBL 2 Technical Reference
Check Short Sensor Name
Returns short sensor name in a format the calculator can handle
P2
0 = Off
1 = On
,Pd ,length
1 1 2
P d
Tone half period in 100ms steps
,Pd , . . . }
2
43