Method To Set Indoor Unit Function Dn Code - Toshiba MMY-MUP0801HT8P-TR Service Manual

Air conditioner multi type, super modular multi system-u smms-u, outdoor
Table of Contents

Advertisement

6-3. Method to Set Indoor Unit Function DN Code

(When performing this task, be sure to use a wired remote controller.)
Procedure
Be sure to stop the air conditioner before making settings
<RBC-AMT*>
1
Push the
+
+
least 4 seconds.
The unit No. displayed first is the address of the header indoor unit in
group control.
Then the fan and louver of the selected indoor unit move.
2
Each time the "Select unit" side of the
pressed, one of the indoor unit Nos. under group control is
displayed in turn. Then the fan and louver of the selected
indoor unit move.
3
Use the
button to select the CODE No. (DN code) of the
desired function.
4
Use the
button to select the desired SET DATA
associated with the selected function.
5
Push the
button. (The display changes from flashing to
steady.)
• To change the selected indoor unit, go back to step
• To change the selected function, go back to step
6
When the
button is pushed, the system returns to normal off state.
buttons simultaneously and hold for at
UNIT LOUVER
button is
2
.
3
.
- 76 -
TEMP.
ON / OFF
TIMER SET
FAN
MODE
TIME
SAVE
VENT
FILTER
RESET
TEST
SET
CL
SWING/FIX
UNIT LOUVER
5
4
3
6
1
2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents