Method To Set Indoor Unit Function Dn Code - Toshiba MMU-UP0071MH-UL Service Manual

8-5. Method to set indoor unit function DN code

(When performing this task, be sure to use a wired remote controller.)
Procedure
Be sure to stop the air conditioner before making settings
<RBC-AWSU5∗ ∗ ∗ ∗ ∗ >
Menu(1/3)
6.Setting louver position
7.Setting timer operation mode
8.Easy I.DN setting
9.DN setting
10.Reset Power Consumption data
1
Push [ Menu] to open the "Menu"
2
Push and hold [
same time to open "Field setting menu"
→ Push and hold 4 seconds.
3
In the "Field setting menu" screen, push
[ ] and [
then push [
4
Push [ ] and [
and the push [
→ "Indoor unit" was selected, the fans and louvres of
the indoor units operate.
When doing group connections:
→ The fans and louvres of the selected indoor units
operate.
5
Push [ ] to black highlight the code (DN),
and then push [
code
6
Push [ ] to black highlight the data, and
then push [
7
After finishing setting the data of the code
(DN), push [
→ "Continue?" is displayed.
8
To set the data of other codes (DN), push
[ Set/Fix]
To not do other settings, push [
→ The changes are fixed, and the "Field setting menu"
screen returns.
→ " " appears while data is changing.
When doing group connections:
→ Push [
Return] to open t he unit selection screen.
In the unit selection screen, push [
briefly display " ", and then return to the "Field
setting menu" screen.
– 58 –
Menu] and [ ] at the
] to select "DN setting", and
Set/Fix]
] to select "Indoor unit",
Set/Fix]
] and [ ] to set the
] and [ ] to set the data
Set/Fix]
Return] to
Return]