Attaching The External Battery; To View The Current Charge Of The External Battery - T-Mobile Pocket PC User Manual

Attaching the External Battery

External Battery Screws

To view the current charge of the external battery

Your Pocket PC Phone contains a Lithium Polymer battery pack. There is a risk of fire and burns if the
battery pack is handled improperly. Do not disassemble, crush, puncture, short external contacts, or dispose
of in fire or water. Do not attempt to open or service the battery pack. Replace only with the battery pack
designated for this product. Dispose of batteries properly.
1. Remove the rubber cap protecting the Pocket PC Phone
connector for the External Battery. The cap is situated just
below the right screw on the back of the Pocket PC Phone.
2. Hook the External Battery into the embedded slot near the
base of the back of your Pocket PC Phone (see picture to the
left).
3. Tighten the screws at the top of the External Battery into
your Pocket PC Phone.
When you attach the External Battery an extra indicator will be
added to the Power screen.
To view this indicator tap Start, Settings, System and then
Power.
Page 14