The Navigation Pad And Dialing; Entering Your Pin - T-Mobile Pocket PC User Manual

The Navigation Pad and Dialing

1.
7.
1.
Take Call – Press to take an incoming call.
Dialer Screen – Press to activate the dialer screen.
Speakerphone – Press and hold to turn on/off the speakerphone.
Dial – Press to dial a number.
2.
Scroll Up – Press to scroll up through a list.
3.
End Call – Press to end a call.
Phone Signal - Press and hold to turn on/off your phone.
4.
Call Log – After launching the dialer screen, press to enter the Call Log feature.
5.
Scroll Down – Press to scroll down through a list.
6.
Center – Press to select.
7.
Speed Dial – After launching the dialer screen, press to enter the Speed Dial feature.
The icons listed below may be seen in the top bar of the screen:
- Phone off or out of network service - tap this icon to turn on the phone.
- In network service - tap this icon to turn off the phone.
- Call Missed - tap this icon to view the call(s) you missed.
- Unread E-mail or SMS - tap the icon to view unread SMS or E-mail.
- Connecting in progress - the icon will disappear when you are connected to your ISP.
- Shows your connection is at full strength

Entering Your PIN

Most Smart Cards are preset with a PIN (Personal Identity Number), provided by your mobile service provider, which you need
to enter whenever you use your Pocket PC Phone. If you are required to enter a PIN, try 1234 as your default.
2.
6.
5.
Page 38
3.
4.