Table of Contents
Advertisement
♦ Remove the stylus.
Please pay particular attention to the
stylus positions in the picture above related to
removing the Smart Card, and the picture to the
right. Do not put the stylus in the hole in the
picture to the right; it will permanently damage
your Pocket PC Phone.
About The Dialer Screen
To access the Dialer Screen, tap
Speed Dial and Phone Settings. You can also find signal status information and important icons that tell you about your call.
♦ Turn over your Pocket PC Phone and
open the Smart Card door with the
stylus.
and then Phone, or press
Press the point of your stylus into the hole until
the Smart Card springs out; then use your fingers
to finish removing.
. From the dialer screen you can make calls, access Call Log,
Page 37
Advertisement
Table of Contents
