Table of Contents
Advertisement
Some programs that accept writing may not have the Pen button. See the documentation for that
program to find out how to switch to writing mode.
To select writing
To convert writing to text
If you want to edit or format writing, you must select it first.
1.
Tap and hold the stylus next to the text you want to select until the insertion
point appears.
2.
Without lifting, drag the stylus across the text you want to select.
If you accidentally write on the screen, tap Tools, then Undo and try again. You
can also select text by tapping the Pen button to deselect it and then dragging the
stylus across the screen.
You can cut, copy and paste written text in the same way you work with typed
text: tap and hold the selected words and then tap an editing command on the
pop-up menu, or tap the command on the Edit menu.
1.
Tap Tools and then Recognize.
2.
If you want to convert only certain words, select them
before tapping Recognize on the Tools menu (or tap and
hold the selected words and then tap Recognize on the
pop-up menu). If a word is not recognized, it is left as
writing.
3.
If the conversion is incorrect, you can select different
words from a list of alternates or return to the original
writing. To do so, tap and hold the incorrect word (tap one
word at a time). On the pop-up menu, tap Alternates. A
menu with a list of alternate words appears. Tap the word
you want to use, or tap the writing at the top of the menu to
return to the original writing.
Tips for getting good recognition
1.
Write neatly.
2.
Write on the lines and draw the end of lowercase letters
(y , g , p) below the line. Write the cross of the "t" and
apostrophes below the top line so that they are not
confused with the word above. Write periods and commas
above the line.
3.
For better recognition, try increasing the zoom level to
300% using the Tools menu.
4.
Write the letters of a word closely and leave big gaps
between words so that the Pocket PC Phone can easily tell
Page 27
Advertisement
Table of Contents
