Descriptions Of Icons On Status Bar; Inserting And Removing Asim Card; Inserting And Removing A Memory Card; Using And Charging The Battery - T-Mobile vairy touch II User Manual

Descriptions of icons on status bar

Icons Descriptions
Network signal strength
Unread SMS
Outdoor
In Roaming
Meeting
Bluetooth On
Audio player is playing
Note: In this user manual:
"Press" means pressing the key and then releasing.
"Hold" means pressing and holding the key for about 2 seconds or more.
"Click" means clicking the corresponding icon on the screen.
"Select" means sliding on the screen with your finger to let the highlight bar stay in the option you want to view. If there is not a left key "Options" on the
screen, "Select" means clicking the option you want to view directly.
Inserting and removing a SIM card
You need to insert a valid SIM card into your mobile phone before you can make and receive calls. All your information regarding network connection
plus many of your contacts are saved on the SIM card. So it makes sense to keep it safe from harm – don't touch the metal surface and keep it far away
from electricity or magnetism.
Turn off your mobile phone, remove the battery and disconnect any external power sources.
1.
Put your SIM card into the socket as shown in the figure.
2.
Turn off your mobile phone and remove the battery before taking out your SIM card.
3.

Inserting and removing a memory card

Turn off your mobile phone, and disconnect any external power sources.
1.
Remove the battery cover.
2.
Insert the memory card into the slot.
3.
Replace the battery cover and close it gently until you hear a click.
4.

Using and charging the battery

There's no need to charge the battery first – you can use it as soon as you've removed the packaging. To help your battery live a long and healthy life,
exhaust it completely before fully recharging it for the first three times.

Installing the battery

Pull the battery cover off gently using the notch on the top right edge and remove the cover.
1.
Insert the battery by aligning the gold coloured contacts with the contacts in the battery slot.
2.
Push down the upper section of the battery until it clicks into place.
3.
Replace the battery cover and close it gently until you hear a click.
4.

Removing the battery

Make sure that your mobile phone is switched off.
1.
Remove the battery cover.
2.
Pull the battery up and remove it from the mobile phone.
3.
Icons Descriptions
Battery capacity
Unread MMS
Calling or in call
Alarm On
GPRS
Silent
General
5