Checking You Are Connected; Turning The Phone On And Off; To Turn Off The Phone; To Turn On The Phone - T-Mobile Pocket PC User Manual

Checking You Are Connected

The default settings for your Pocket PC Phone are programmed to assume you want to use your phone so, providing you have
inserted a Smart Card, your Pocket PC Phone will turn on your mobile phone connection to your service provider's network.
The icon indicates that you are connected to the network of your mobile phone operator. Thereafter a full strength signal is
indicated by , and as the strength of the signal diminishes so will the number of vertical bars in the icon, with no bars
indicating no signal.
If you have turned the phone off, removed and then reinserted the Smart Card, your Pocket PC Phone will not
automatically turn the phone on. In this event, turn it on as described below in Turning the Phone On and Off.

Turning The Phone On and Off

As indicated above your Pocket PC Phone will turn on your phone when you insert a Smart Card. However, you can choose to
turn off your phone and just use the Pocket PC features at any time – and then turn the phone back on when you want.

To turn off the phone

Press and hold the button until

To turn on the phone

Press and hold until
1. Enter the preset PIN from your mobile phone service provider (please contact
your mobile service provider).
2. Tap Enter.
blocked. If this happens, you can unblock it with the PIN Unblocking Key
from your mobile phone service provider.
3. To change your default PIN go to Settings, tap Phone and then tap Change
PIN.
appears in the navigation bar.
appears in the top toolbar.
If your PIN is entered incorrectly three times, the Smart Card will be
Page 39