Description Of Icons On Status Bar; Inserting And Removing Asim Card; Inserting A Memory Card; Sing And Charging The Battery - T-Mobile E110 Zest User Manual

Description of icons on status bar

Icons Descriptions
Network signal strength
Unread SMS
Outdoor
Missed call
Meeting
Headset
Inserting and removing a SIM card
You need to insert a valid SIM card into your mobile phone before you can make and receive calls. All your information regarding network connection
plus many of your contacts are saved on the SIM card. So it makes sense to keep it safe from harm – don't touch the metal surface and keep it far away
from electricity or magnetism.
Make sure that the phone is switched off and the charger is disconnected from the phone.
1.
Turn the phone over and remove the battery cover.
2.
Remove the battery if it is already installed.
3.
Hold your SIM card with the cut corner oriented as shown and then slide it into the card holder with the metal contacts facing downward.
4.
Replace the battery first.
5.
Replace the battery cover.
6.

Inserting a memory card

Open the battery cover and remove the battery.
1.
Push the metal slot in the direction of the arrow as indicated below and flip it up. (Diagrams 1 & 2 below)
2.
Insert the card into the metal slot with the metal contacts facing down until it clicks to the right position. (Diagram 3 below)
3.
Flip the metal slot back and push back in the direction of the arrow to LOCK it. (Diagram 4 below)
4.
Push the metal slot 2. Flip up the metal slot
3. Insert the memory card
Using and charging the battery
There's no need to charge the battery first – you can use it as soon as you've removed the packaging. To help your battery live a long and healthy life,
exhaust it completely before fully recharging it for the first three times.

Installing the battery

Pull the battery cover downward and remove it.
1.
Insert the battery by aligning the metal contacts with the contacts in the battery slot.
2.
Push down the upper section of the battery until it clicks into place.
3.
Replace the battery cover and close it gently until you hear a click.
4.
Remove the battery cover
4.Flip the metal slot back & push down in direction of arrow to lock
Push down the battery
Icons Descriptions
Battery capacity
General
Keypad locked
Alarm On
Call diverting
Silent
5