Table of Contents
Advertisement
Back up or restore your system using SD Backup
Screen Tapping Calibration and Recalibration
When you first start up your Pocket PC Phone, you will be asked to calibrate the screen by tapping the center of a cross with your
stylus as it moves around the screen. This process ensures when you tap the screen with your stylus the item tapped is activated.
If you are using your Pocket PC Phone and you discover tapping an item does not bring up the appropriate response, your Pocket
PC Phone has lost its calibration.
To recalibrate the screen
1. Push the memory card into the slot until it clicks into place (see
Chapter 2, "Inserting or removing a memory card"). The card is
secure when it is not protruding from the base.
2. Tap
, Programs,
tab.
3. Tap Open, Storage Card.
4. Make sure there are no application programs running in the
background, and then tap Start.
•
Tap Settings, System and then Screen.
•
As described above, tap the center of the cross to with your
stylus as it moves around the screen.
•
Tap. Touch the screen once with the stylus to open items and
select options.
•
Drag. Hold the stylus on the screen and drag across the screen
to select text and images. Drag in a list to select multiple items.
•
Tap and hold. Tap and hold the stylus on an item to see a list of
actions available for that item. On the pop-up menu that
appears, tap the action you want to perform.
Page 18
(SD Backup) then the Backup or Restore
Advertisement
Table of Contents
