Table of Contents
Advertisement
Bottom Edge Components
1
Soft Reset. Press into the hole with the end of your stylus to reset your Pocket PC Phone.
2
Sync Connector. Use this connector when synchronizing/transmitting data or when recharging.
3
Earphone Jack. Use the earphone jack or the phone's hands-free kit to listen to audio media.
4
Battery On/Off Switch. Press into the hole with the end of the top-half of your stylus to return the Pocket PC Phone to
factory settings.
CAUTION:
Battery Off will wipe all the data from your Pocket PC Phone!
5
MMC And SD Card Slot. Insert either MMC or SD cards in this slot.
USB Cradle
Temperature and Battery Life
Your Pocket PC Phone contains a rechargeable Lithium Polymer battery, which is housed permanently in your Pocket PC Phone.
After a few years of continual use and recharging the battery will become unusable and should be changed through a service
center. While you are using your Pocket PC Phone the amount of power consumed depends on whether you are talking on the
phone, using the PIM and Internet functions or the Pocket PC Phone is on standby. The estimates for battery life (talk time: 4~5
hours, PIM: 15-17 hours and standby: 150 -170 hours) are based on only using one function. Since you will be continually
swapping between functions, these estimates will vary.
1.
2.
5.
•
Your Pocket PC Phone comes with a USB cradle. This allows you to
recharge your Pocket PC Phone, as well as synchronize information
between your Pocket PC Phone and a PC using ActiveSync.
To synchronize, plug the USB cradle into an available USB port
on your PC.
Page 11
3.
4.
Advertisement
Table of Contents
