Table of Contents
Advertisement
Precautions
(*1) The sensitivity is measuring the luminance when white level achieved 100 % in below conditions.
Camera Setting
Parameter
Gain Up
AGC
White Balance
Electrical Shutter
Black Level
Gamma
(*2) The frame rate does not increase by the binning function.
(*3) The camera operates as USB3.0 standard even the camera connecting to a USB 2.0 port. Please careful
about the power consumption of the camera when the camera connecting to USB2.0 port.
The guideline to perform the full frame rate with full resolution of camera
The data transfer speed on the USB bus is depending on the performance of USB host controller.
The data transfer speed on the USB bus is very important to obtain full frame rate with full resolution. (56 fps @
3.2M, 35.8 fps @ 5.0M)
Renesas / Fresco Logic host controller improved the data transfer speed drastically in the second generation.
However, the transferring speed of Intel chipset is 10 to 20% faster than these host controllers.
When using USB3.0 interface PCI Express board, please insert it to the PCI Express Gen2.0 (5.0[GT/s]) slot. If
non-PCI Express Gen2.0 (5.0[GT/s]) is used, data transfer speed could decrease by about 50%.
If the frame rate is slow due to the performance of USB host controller, the frame rate of camera should adjust
based on the performance of USB host controller. This may resolve to increase the frame rate.
PC resources may have consumed during the image processing (color interpolation, image display, etc.) with huge
image data from camera.
STC-MBS312U3V / STC-MCS312U3V / STC-MBS500U3V / STC-MCS500U3V
Product Specifications and Use's Guide
For more information please contact Aegis Electronic Group, Inc. *(888)687-6877 *aegis-g2@aegiselect.com *http://www.aegiselect.com
Environment
Setting
Parameter
0 dB
Light Source
Off
Color temperature
Optimum
Lens
1/30 seconds
F on Lens
Optimum
Target Luminance
Factory Setting
Setting
Light Box (White)
5,100K
F5.6
IM-600 (Topcon)
No.16S024-02
15/64
Advertisement
Table of Contents
