Table of Contents
Advertisement
Name
GainSelector
Gain
GainAuto
GainAutoLimitMax
GainAutoLimitMin
AutoLightTarget
BlackLevelSelector
BlackLevel
BalanceRatioSelector
BalanceRatio
BalanceWhiteAuto
Name
PixelCorrectionAllEnabled
PixelCorrectionIndex
PixelCorrectionEnabled
PixelCorrectionX
PixelCorrectionY
Name
UserSetSelector
UserSetLoad
UserSetSave
UserSetDefault
STC-MBS312U3V / STC-MCS312U3V / STC-MBS500U3V / STC-MCS500U3V
Product Specifications and Use's Guide
For more information please contact Aegis Electronic Group, Inc. *(888)687-6877 *aegis-g2@aegiselect.com *http://www.aegiselect.com
Description
Selects which Gain is controlled by the various Gain features.
Controls the selected gain as an absolute physical value. This is an amplification factor
applied to the video signal.
Sets the automatic gain control (AGC) mode. The exact algorithm used to implement
AGC is device-specific.
Determine the upper limit of gain when GainAuto is set to Continuous.
Determine the lower limit of gain when GainAuto is set to Continuous.
Determine the brightness target for GainAuto.
Selects which Black Level is controlled by the various Black Level features.
Controls the black level as an absolute physical value. This represents a DC offset
applied to the video signal.
Selects which Balance ratio to control.
Controls ratio of the selected color component to a reference color component. It is
used for white balancing.
Controls the mode for automatic white balancing between the color channels. The
white balancing ratios are automatically adjusted.
Description
Enable pixel correction for all pixels.
Determine index of targeted pixel for pixel correction.
Determine if targeted pixel is enabled for pixel correction.
Determine x-coordinate of targeted pixel for pixel correction.
Determine y-coordinate of targeted pixel for pixel correction.
Description
Selects the feature User Set to load, save or configure.
Loads the User Set specified by UserSetSelector to the device and makes it active.
Save the User Set specified by UserSetSelector to the non-volatile memory of the
device.
Selects the feature User Set to load and make active by default when the device is
reset.
No.16S024-02
61/64
Advertisement
Table of Contents
