Table of Contents
Advertisement
No.
(COM1)
425
Terminator judgement time
(x 0.01 ms)
(COM2)
426
Terminator judgement time
(x 0.01 ms)
(COM3)
427
Terminator judgement time
(x 0.01 ms)
(Note 1)
When computer link or MODOBUS RTU is selected by no. 412 (Communication mode), no. 413
(Transmission format) and no. 415 (Baud rate) can be set.
(Note 2)
You can select terminator in no. 413 (Transmission format) and set the end code and start code only
when general-purpose communication is selected by no. 412 (Communication mode). In addition, you
can select nos. 424 to 427 only when selecting time for the terminator in no. 413.
(Note 3)
The PLC link function is available for the COM0 or COM1 port only. The transmission format is set to
"Data length: 8 bits; Parity: Odd; Stop bit: 1 (fixed)". In addition, select the baud rate by the PLC link
W0-0 system register no. 48.
WUME-FPXHCOMG-02
10.4 List of System Registers (COM Communication)
Name
0
0
0
Default
Set value range and description
10-13
Advertisement
Table of Contents
