Table of Contents
Advertisement
2
Hardware description
2.1 C213 baseboard
Figure 6
shows the supported physical interfaces and other key components on the C213 baseboard,
including:
•
NORA-W106 stand-alone multiradio module (U1)
•
3x mikroBUS™ connectors (MB1, MB2, and MB3) for plugging up to three Mikroe Click boards™,
including the GNSS RTK 2, 4G LTE 2, and LBAND RTK Click boards supplied with the kit.
•
18650 Li-Ion battery holder for accommodating one single-cell Li-ion battery (BATT1)
•
USB-to-UART converter exposed on USB-C connector for easy communication and programming
with NORA-W106, system power and battery charging (J6_2)
•
Native NORA-W106 USB-C connector exposing USB, system power and battery charging (J6_1)
•
Qwiic® connector for evaluating external sensors (J22)
•
User-defined LED (RGB)
•
3x buttons for basic functions (NORA Reset, BTN1, and BTN2)
•
Wheel tick / direction connector (J2)
•
MicroSD card connector (J1)
Figure 6: C213 baseboard assembly
UBX-23000692 - R01
C1-Public
Hardware description
XPLR-HPG-1 - User guide
Page 13 of 37
Advertisement
Table of Contents
