Table of Contents
Advertisement
Driving stability control systems
Vehicle features and options
This chapter describes model-specific equip-
ment, systems, and functions that are currently
available, or may become available in the fu-
ture, even if they are not present in the vehicle.
Additional information:
Vehicle equipment, refer to page 8.
Antilock Braking System
Principle
The Antilock Braking System prevents locking
of the wheels while braking.
You remain able to steer your vehicle even dur-
ing full braking, which increases active driving
safety.
General information
The Antilock Braking System is ready after
each time drive-ready state is turned on.
Malfunction
The warning light on the instrument
cluster illuminates.
A Check Control message is displayed.
▷
The Antilock Braking System is not availa-
ble.
▷
Steerability is limited during full braking.
Have the vehicle checked immediately by an
authorized service center or another qualified
service center or repair shop.
Driving stability control systems
Online Edition for Part no. 01405A8A749 - VI/23
Brake assistant
The brake assistant automatically applies
maximum braking assistance when the brake
pedal is depressed quickly. This reduces the
braking distance to a minimum for full braking.
To make full use of braking assistance, do not
reduce the pressure on the brake pedal during
full braking.
Drive-off assistant
Principle
The drive-off assistant supports driving off on
uphill grades.
Driving off
1.
Hold the vehicle by depressing the brake
pedal.
2.
Release the brake pedal and drive off
quickly.
After the brake pedal is released, the vehicle is
held in place for approx. 2 seconds.
Depending on the vehicle loading, the vehicle
may roll back slightly.
In order to prevent rolling back when driving
off, use the parking brake.
1.
Pull and release switch before driv-
ing off.
The parking brake is set.
2.
Step on the accelerator pedal sufficiently to
drive off.
CONTROLS
197
Advertisement
Table of Contents
