Table of Contents
Advertisement
CONTROLS
Lane Change Assistant
Principle
The Lane Change Assistant also assists when
changing lanes on multi-lane roads.
General information
The system uses the sensors of the Steering
Assistant.
Safety information
Warning
The system cannot serve as a substitute for
the driver's personal judgment in assessing
the traffic situation. Based on the limits of
the system, it cannot independently react
to all traffic situations. There is a risk of
accident. Adjust driving style to traffic condi-
tions. Watch the surrounding traffic situation
closely, be ready to take over steering and
braking at any time, and actively intervene
where appropriate.
Additionally, the notices for the Steering Assis-
tant apply.
Additional information:
Steering Assistant, refer to page 218.
Functional requirements
▷
The functional requirements of the Steering
Assistant are fulfilled.
Functional requirements, refer to page 219.
▷
Driving on a road without pedestrians or cy-
clists and with physical barriers to oncom-
ing traffic such as crash barriers.
▷
Crossable lane boundaries are detected.
▷
Maximum speed approx.
110 mph/180 km/h.
224
Driver assistance systems
Online Edition for Part no. 01405A8A749 - VI/23
▷
The minimum speed is country-specific.
▷
The function must be available in the coun-
try in which the vehicle is driven.
Turning on/turning off Lane Change
Assistant
1.
Apps menu
2.
"Vehicle"
3.
"Driving settings"
4.
"Driver Assistance"
5.
"Driving"
6.
"Assisted Driving"
7.
"Automatic Lane Change"
Changing lanes
1.
Ensure that the traffic situation permits
changing lanes.
2.
Press the turn signal lever in the required
direction to the pressure point for signaling
briefly.
A supporting steering movement in the re-
quired direction can be detected a short
time later.
After the lane change, the system helps keep
the vehicle in the new lane.
Canceling a lane change
The lane change can be canceled by steering
movement into the opposite direction.
Advertisement
Table of Contents
