BMW 3 SEDAN 2023 Series Owner's Manual page 80

CONTROLS
▷ Engaging selector lever position N.
▷ Using vehicle equipment.
There is a risk of accidents or injuries. Do not
leave children or animals unattended in the
vehicle. Take the vehicle key with you when
exiting and lock the vehicle.
Actions during unlocking
Depending on the settings, the following func-
tions are performed when unlocking the vehi-
cle:
▷ Only the driver's door and the fuel filler flap
will be unlocked or all access to the vehicle
will be unlocked.
▷ The unlocking of the vehicle can be con-
firmed with a light signal or a sound signal.
▷ The welcome light can be turned on when
the vehicle is being unlocked.
In addition, the following functions are exe-
cuted:
▷ If a BMW ID or a driver profile was assigned
to the vehicle key, this BMW ID or driver
profile will be activated.
▷ The interior lights are switched on, unless
they were manually switched off.
▷ Depending on vehicle equipment, folded-in
exterior mirrors are folded out.
If the exterior mirrors were folded in via the
button in the vehicle interior, they will not
be folded out during unlocking.
▷ Anti-theft protection is switched off.
▷ The alarm system is switched off.
Additional information:
▷ Settings, refer to page 92.
▷ Welcome lights, refer to page 161.
▷ BMW ID/driver profiles, refer to page 65.
Actions during locking
Depending on the settings, the following func-
tions are performed when locking the vehicle:
80
Opening and closing
Online Edition for Part no. 01405A8A749 - VI/23
▷ The locking of the vehicle can be confirmed
with a light signal or a sound signal.
▷ Depending on vehicle equipment, the exte-
rior mirrors can be folded in automatically
when locking. The exterior mirrors are not
folded in when the hazard warning flashers
are switched on.
The following functions are executed:
▷ All doors, the tailgate, and the fuel filler flap
are locked.
▷ Anti-theft protection is switched on. This
prevents the doors from being unlocked us-
ing the lock button or door opener.
▷ The alarm system is switched on.
If the drive-ready state is still turned on when
you lock the vehicle, the vehicle horn will honk
twice. In this case, the drive-ready state must
be switched off by means of the Start/Stop
button.
Additional information:
Settings, refer to page 92.
With the vehicle key
Unlocking the vehicle
Press the button on the vehicle key.
If only the driver's door and fuel filler flap have
been unlocked due to the settings in place,
press the button on the vehicle key again to
unlock the other vehicle access points.
The lighting functions may depend on the am-
bient brightness.
Locking the vehicle manually
1. Close the driver's door.
2. Press the button on the vehicle key.
All vehicle access points are locked.