BMW 3 SEDAN 2023 Series Owner's Manual page 213

tem takes into account the traffic situation and
ambient conditions, e.g. poor visibility.
1. Apps menu
2. "Vehicle"
3. "Driving settings"
4. "Driver Assistance"
5. "Driving"
6. "Speed Limit Assistance"
7. "Situational distance control"
Continuing cruise control
Warning
The set speed can be incorrectly adjusted
or called up by mistake. There is a risk of
accident. Adjust the set speed to the traffic
conditions. Watch surrounding traffic closely
and actively intervene where appropriate.
An interrupted cruise control can be continued
by calling up the stored speed. The difference
between the current speed and the stored
speed should be as little as possible.
Press the button on the steering wheel with
the system interrupted:
With Steering Assistant.
Without Steering Assistant.
Cruise control is continued with the stored val-
ues.
In the following cases, the stored speed value
is deleted and cannot be called up again:
▷ When the system is switched off.
▷ When drive-ready state is switched off.
Driver assistance systems
Online Edition for Part no. 01405A8A749 - VI/23
Changing between Cruise Control
with/without Distance Control
Safety information
Warning
The system does not react to traffic driv-
ing ahead of you, but instead maintains the
stored speed. There may be a risk of acci-
dents or risk of damage to property. Adjust
the set speed to the traffic conditions and
brake as needed.
Changing over the Cruise Control mode
Switching Cruise Control without Distance
Control off and on:
▷ Press and hold this button.
▷ Press and hold this button.
With Steering Assistant: switch on Distance
Control:
Press the button.
Without Steering Assistant: switch on Distance
Control:
▷ Press the button.
▷ Press the button.
After changing, a Check Control message is
displayed.
Displays in the instrument cluster
General information
Depending on the equipment version, the dis-
plays in the instrument cluster may vary.
CONTROLS
213