Driving Stability Control Systems - BMW Z4 ROADSTER Owner's Manual

Hide thumbs Also See for Z4 ROADSTER:
Table of Contents

Advertisement

Driving stability control systems

Vehicle features and options
This chapter describes all standard, country-
specific, and optional equipment offered with
the series. It also describes features and func-
tions that are not necessarily available in the
vehicle, e.g., due to the selected options or
country versions. This also applies to safety
functions and systems. When using these
functions and systems, the applicable laws
and regulations must be observed.
Antilock Braking System
Principle
The Antilock Braking System prevents locking
of the wheels while braking.
You remain able to steer your vehicle even dur-
ing full braking, which increases active driving
safety.
General information
The Antilock Braking System is ready after
each engine start.
Malfunction
The warning light on the instrument
cluster illuminates.
A Check Control message is displayed.
The Antilock Braking System is not availa-
ble.
Steerability is limited during full braking.
Have the vehicle checked immediately by an
authorized service center or another qualified
service center or repair shop.
Driving stability control systems
Online Edition for Part no. 01405A88B63 - VI/23
Brake assistant
The brake assistant automatically applies
maximum braking assistance when the brake
pedal is depressed quickly. This reduces the
braking distance to a minimum for full braking.
To make full use of braking assistance, do not
reduce the pressure on the brake pedal during
full braking.
Drive-off assistant
Principle
The drive-off assistant supports driving off on
uphill grades.
Driving off
1.
Hold the vehicle by depressing the brake
pedal.
2.
Release the brake pedal and drive off
quickly.
After the brake pedal is released, the vehicle is
held in place for approx. 2 seconds.
Depending on the vehicle loading, the vehicle
may roll back slightly.
In order to prevent rolling back when driving
off, use the parking brake.
1.
Pull and release switch before driving
off.
The parking brake is set.
2.
Step on the accelerator pedal sufficiently to
drive off.
CONTROLS
187
OwnersManuals2.com

Advertisement

Table of Contents
loading

Table of Contents