BMW 3 SEDAN 2023 Series Owner's Manual page 251

3. "Temp. adjustment upper body"
4. Increase or decrease temperature.
Air conditioning
Principle
With the climate control function, the air inside
the vehicle is cooled and dehumidified, then
warmed again depending on the temperature
settings.
Functional requirement
Standby or drive-ready state is switched on.
Switching the cooling function on/off
1. "CLIMATE MENU"
2. Climate control function.
Depending on the weather, the windshield and
the side windows may fog up briefly when
drive-ready state is switched on.
When using the cooling mode, condensation
that will exit below the vehicle.
Maximum cooling
Principle
Maximum cooling lets you cool the vehicle in-
terior quickly and effectively.
The lowest temperature and the maximum air
flow are set automatically.
The function is automatically activated in the
rear when the SYNC program is turned on.
General information
The system is set to the lowest temperature
and maximum air volume.
The function is automatically activated in the
rear when the SYNC program is turned on.
Online Edition for Part no. 01405A8A749 - VI/23
Climate control
Functional requirement
The function is available at an outside temper-
ature above approx. 32 ℉/0 ℃ and with the
drive-ready state switched on.
Turning maximum cooling on/off
1. "CLIMATE MENU"
2. "MAX A/C"
Air flows out of the air vents to the upper body
area. Open the vents.
Air recirculation mode
Principle
You may react to unpleasant odors or pollu-
tants in the immediate environment by tempo-
rarily suspending the supply of outside air. The
system then recirculates the interior air.
In automatic recirculated-air control mode, out-
side air is fed in or the interior air recirculated
depending on the outside air quality.
When the air recirculation is turned off, outside
air is directed into the interior.
General information
If there is window condensation, turn off the air
recirculation.
The interior filter cleans the incoming fresh
air or the circulated interior air in recirculation
mode.
Turning air recirculation on/off
1. "CLIMATE MENU"
2. The current operating mode is displayed in
the toolbar. Select the desired setting in the
toolbar:
▷ "Air recirculation"
▷ "Fresh air"
▷ "Auto air recirculation"
CONTROLS
251