Table of Contents
Advertisement
Press the button on the vehicle key
three times within 1 second.
After operating the vehicle key, it will
take approximately 3 seconds until the engine
is switched on.
To switch off the system, press the button
again three times.
Switching off with the Start/Stop
button
The system can be switched off directly by
pressing the Start/Stop button without de-
pressing the brake pedal.
Climate control for departure time
General information
Scheduled departure times can be set up in
the system to ensure a comfortable interior
temperature in the vehicle at the time of depar-
ture.
▷
One-time departure time: the time of the
scheduled departure can be set.
The system is switched on once.
▷
Departure time with weekday: time and day
of the week of the scheduled departure can
be set.
The departure time is preselected in two steps:
▷
Set departure times.
▷
Activate departure times.
The system is activated automatically a few
minutes before the set departure time. The
system remains switched on for a short time
after the set departure time.
For safety reasons, the air conditioning can
only be activated once for the departure time.
The system will be available again as soon
as the drive-ready state is activated and deac-
tivated again.
Observe the information about the intended
use of the vehicle.
Online Edition for Part no. 01405A8A749 - VI/23
Climate control
Additional information:
For Your Own Safety, refer to page 8.
Setting the departure time
1.
"CLIMATE MENU"
2.
"Settings"
3.
"Pre-conditioning"
4.
"Departure plan"
5.
Set the departure time.
6.
Select day of the week, if needed.
Activating the departure time
1.
"CLIMATE MENU"
2.
"Settings"
3.
"Pre-conditioning"
4.
"Departure plan"
5.
Activate the desired departure time.
Display
In the instrument cluster:
The engine runs for the purpose
of operating the pre-condition-
ing. The vehicle is not ready to
drive.
Icon
Description
Icon on the instrument
panel.
Icon illuminates: a depar-
ture time is activated.
Icon flashes: pre-condition-
ing is switched on.
Confirmation signals from the
vehicle
The activation of the system is confirmed by
flashing twice.
The parking lights are switched on as long as
the system is switched on.
CONTROLS
257
Advertisement
Table of Contents
