Table of Contents
Advertisement
CONTROLS
Using parking aid lines
1.
Position the vehicle so that the red turning
circle line leads to within the limits of the
parking space.
2.
Turn the steering wheel to the point where
the green pathway line covers the corre-
sponding turning circle line.
Obstacle marking
Obstacles are detected by the sensors.
The obstacles detected by the Park Distance
Control are shown by marks in the camera im-
age.
Colored gradients for the obstacle markings in
green, yellow and red indicate the distances.
Functional limitations
The system can be used only to a limited ex-
tent in the following situations:
▷
With a door open.
▷
With open cargo area.
▷
With exterior mirrors folded in.
Areas with gray hatching with an icon in the
camera image identify areas that are currently
not shown such as an open door.
230
Parking
Online Edition for Part no. 01405A8A749 - VI/23
System limits
Safety information
Warning
Due to its limits, the system may not react, or
it may react too late or in a manner that is not
consistent with normal use. There may be a
risk of accidents or risk of damage to prop-
erty. Actively intervene as warranted. Refer
to the information in this Owner's Manual re-
garding the scope of the system's operation
and limitations.
System limits of the sensors
Additional information:
Sensors of the vehicle, refer to page 37.
Field of view
Because of the camera angle, the areas under
the vehicle cannot be viewed by the cameras.
Detection of objects
Very low obstacles as well as high, protruding
objects such as ledges may not be detected by
the system.
The objects displayed on the control display
may be closer than they appear. Do not esti-
mate the distance to the objects on the control
display.
Protruding cargo or a rear carrier can limit the
detection range of the camera.
Malfunction
A camera failure is displayed on the control
display.
The detection range of the failed camera is
shown shaded on the control display.
Advertisement
Table of Contents
