Table of Contents
Advertisement
The adaptive lighting functions are active
when the drive-ready state is switched on.
Cornering light
Principle
In tight curves, for instance on mountainous
roads or when turning, an additional cornering
light is switched on that illuminates the inside
of the curve when the vehicle is moving below
a certain speed.
General information
The cornering light is automatically switched
on depending on the steering-wheel angle or,
where applicable, the use of turn signals.
When driving in reverse, the cornering lights
may be automatically switched on regardless
of the steering-wheel angle.
Adaptive headlight range
control
The adaptive headlight range control feature
balances out acceleration and braking proc-
esses as well as the vehicle load conditions in
order to avoid blinding oncoming traffic.
Instrument lighting
Functional requirement
The brightness can only be adjusted when the
parking lights or low beams are turned on.
Setting the brightness
Adjust the brightness with the
thumbwheel.
Online Edition for Part no. 01405A8A749 - VI/23
Light and view
Interior lighting
General information
Depending on the equipment version, interior
lights, footwell lights, entry lights, ambient
lighting, and speaker lighting are automatically
controlled.
Overview
Reading lights
Interior lights
Turning interior lights on/off
Press the button.
To switch off permanently: press the button
and hold for approx. 3 seconds.
The interior lights in the rear of the vehicle
can be switched on and off independently. The
button is located in the rear headliner.
Turning reading lights on/off
Press the button.
Depending on the vehicle equipment, the read-
ing lights are located next to the interior lights
in the front and rear.
CONTROLS
163
Advertisement
Table of Contents
