BMW 3 SEDAN 2023 Series Owner's Manual page 184

CONTROLS
Functional requirement
The areas of the sensors must be clean and
clear.
Turning Active Blind Spot Detection
on/off
1. Apps menu
2. "Vehicle"
3. "Driving settings"
4. "Driver Assistance"
5. "Safety and warnings"
6. "Active Blind Spot Detection"
7. Select the desired setting.
Adjusting the Active Blind Spot
Detection
Setting the warning time
1. Apps menu
2. "Vehicle"
3. "Driving settings"
4. "Driver Assistance"
5. "Safety and warnings"
6. "Active Blind Spot Detection"
7. Select the desired setting.
Setting the intensity of the steering
wheel vibration
1. Apps menu
2. "Vehicle"
3. "Driving settings"
4. "Driver Assistance"
5. "Feedback via steering wheel"
6. "Vibration intensity"
7. Select the desired setting.
The setting is applied to all collision warning
systems.
184
Safety
Online Edition for Part no. 01405A8A749 - VI/23
Depending on the national-market
version: turning steering intervention
on/off
1. Apps menu
2. "Vehicle"
3. "Driving settings"
4. "Driver Assistance"
5. "Safety and warnings"
6. "Active Blind Spot Detection"
7. "Steering intervention"
Display in the instrument cluster
Depending on vehicle equipment and national-
market version, information for the system is
displayed in the Assisted View of the instru-
ment cluster.
Additional information:
Assisted View, refer to page 152.
Warning function
Warning light in exterior mirror
The warning light in the exterior mirror warns
of a possible collision with a detected vehicle.
Prewarning
The dimmed warning light in the exterior mirror
indicates when vehicles are in your blind spot
or approaching from the rear.