BMW 3 SEDAN 2023 Series Owner's Manual page 143

riod can seriously damage emission control
components, in particular the catalytic con-
verter.
Have the vehicle checked by an authorized
service center or another qualified service cen-
ter or repair shop.
Additional information:
Socket for OBD on-board diagnostics, refer to
page 329.
Green lights
Turn signal
Turn signal is on.
Unusually rapid flashing of the indicator
light indicates that a turn signal bulb
has failed.
Additional information:
Turn signal, refer to page 157.
Parking lights
Parking lights are switched on.
Additional information:
Parking lights, low beams, refer to
page 160.
Low beams
Low beams are switched on.
Additional information:
Parking lights, low beams, refer to
page 160.
Automatic High Beam Assistant
Low beams are switched on and the
Automatic High Beam Assistant is acti-
vated.
High beams are switched on and off automati-
cally depending on the traffic situation.
Additional information:
Online Edition for Part no. 01405A8A749 - VI/23
Displays
Automatic High Beam Assistant, refer to
page 158.
Lane departure warning
Depending on vehicle equipment and
national-market version:
The indicator light illuminates: the sys-
tem is switched on. At least one lane boundary
has been detected on one side of the vehicle.
The system is ready to intervene and issue
warnings. The system can perform steering in-
terventions.
Indicator light flashes: the system is perform-
ing a steering intervention.
Additional information:
Lane departure warning, refer to page 180.
Automatic Hold: vehicle is held
automatically
Automatic Hold is ready to use. The
vehicle is automatically held in place
when it is stationary.
Additional information:
Automatic Hold, refer to page 132.
Automatic Hold: vehicle secured
against rolling away
The vehicle is automatically secured
against rolling away after stopping.
Additional information:
Automatic Hold, refer to page 132.
Manual Speed Limiter
The indicator light illuminates: the sys-
tem is switched on.
The indicator light flashes: the set
speed limit has been exceeded.
Additional information:
Manual Speed Limiter, refer to page 203.
CONTROLS
143