Complete Manual for RoboSHOT 20 UHD and RoboSHOT 40 UHD Professional PTZ Cameras
RoboSHOT 20 UHD: Back of the Camera
From left to right:
12 VDC, 3.0 A power connector – For local power. Not used when connecting the camera to a
n
OneLINK device or a PoE++ power injector. Use only the 12 VDC, 3A power supply.
OneLINK HDBaseT connector – Network connectivity for streaming and control; also for power if a
n
PoE++ injector or OneLINK device is used.
HDMI connector – HDMI video output.
n
HD-SDI connector – HD-SDI video output.
n
RS-232 port – Allows an external device to control the camera using a modified VISCA protocol. See
n
RS-232 Serial Communication Settings and Port
HD video select switch – Sets the video output resolution.
n
Camera Settings DIP switches – Sets camera behaviors such as IR remote frequency, image flip,
n
and RS-232 baud rate. See
Pin-outs.
Camera Settings
for more information.
5