Etac / Cross 5 / www.etac.com
Unfolding
•
Push down on one side of the seat frame,
using the whole of the flat of the hand.
•
Lower the foot supports.
Risk of pinching! Do not hold the seat
tube while unfolding.
Folding
•
If a bow handle and/or cross brace is
mounted they should be removed.
•
Flip up the foot supports.
•
Lift up the seat.
Rear wheel with quick release
When assembling, always make sure that
the quick-release button in the hub
springs out properly. Test by pulling the
wheel.
Anti-tips
•
The anti-tips can be flipped up.
•
Ensure the locking function
works properly when activa-
ting the anti-tip.
•
After any adjustments on your wheelchair, always
ensure that you check the function of the anti-tips.
If necessary to adjust, please contact your dealer or
your Technical Aids Centre.
User manual
Handling
Click!
22
Click!
Click!
3–7 cm