Handling/Transport - Etac Sting Manual

2:1 Folding
-
Remove any armrests
or sideguards.
- Remove the rear wheels.
- Fold down the backrest by pulling
upwards on the cord.
2:2 Unfolding
- Attach the rear wheels
- Fold up the backrest
- Attach any armrests or sideguards
required.
2:3 Lifting the wheelchair
- Lift using the push handles and
the front part of the frame.
2:4 Transportation in vehicles
Private car/taxi: The wheelchair
should be placed in the car boot. If
this is not possible, ensure that the
wheelchair is placed safely in a seat,
2:5 Securing
The wheelchair must be secured as
follows, the straps must not be put
through the wheels or around the back
tubes.

2 Handling/Transport

When attaching the rear
wheels, always check that they
are securely mounted.
The button in the hub should
pop out completely.
Before lifting, ensure that
the push handles are securely
fastened.
so that it cannot overturn or roll. If
possible secure the wheelchair with the
car's safety belt.
4