Handling/Transport - Etac Act Manual

2:1 Folding
- Remove any armrests or
sideguards.
- Remove the rear wheels.
- Fold down the backrest by
pulling upwards on the cord.
2:2 Unfolding
- Attach the rear wheels
- Fold up the backrest
- Attach any armrests or side-
guards required.
2:3 Lifting the wheelchair
- Lift using the push handles
and the front part of the
frame.
2:4 Transportation in vehicles
Private car/taxi: The wheelchair can
be placed in the car boot. If this is not
possible, ensure that the wheelchair is
2:5 Securing
The wheelchair must be secured as
follows, the straps must not be put
through the wheels or around the back
tubes.

2 Handling/Transport

When attaching the rear
wheels, always check
that they are securely
mounted.
The button in the hub
should pop out completely.
Before lifting, ensure that
the push handles are se-
curely fastened.
placed safely in a seat, so that it cannot
overturn or roll. If possible secure the
wheelchair with the car's safety belt.
4