Related Manuals for Etac Convaid Safari Tilt
Summary of Contents for Etac Convaid Safari Tilt
- Page 1 ENGLISH User and Service Manual Safari Tilt Tilt-In-Space Position Tilting Chairs READ INSTRUCTIONS BEFORE USING SAVE THIS BOOK FOR FUTURE REFERENCE...
- Page 2 Toll Free: 1-844-US Mobility (844-876-6245) Phone: (310) 618-0111 Fax: (310) 618-8811 Email: convaidsales .us@etac .com International Email: international .convaid .us@etac .com Website: www .etac .us .com Technical assistance or repair information hours are: Monday-Friday, 6 a .m . to 4:30 p .m . PST Before Calling: Please fi ll in the following.
-
Page 3: Table Of Contents
CONVAID USER’S GUIDE Table of Contents Setting Up Definition Of Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Unpacking . - Page 4 CONVAID USER’S GUIDE Seat Cushions Sensiform Seat Cushions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Cushion Types .
-
Page 5: Definition Of Symbols
. The latest version of all instructions and product safety notices are available on the Convaid website (www .etac .us .com) and can be printed in larger sizes . Additional video instructions are also available for reference purposes . - Page 6 CONVAID USER’S GUIDE This symbol indicates a wheelchair which cannot be used in motor vehicle as vehicle seat . This wheelchair does not comply with WC19 (RESNAWC-4:2012 for ISO7176-19:2008) and cannot be used as a vehicle seat to transport the user in a vehicle . The Symbol indicates a wheelchair which can be used in motor vehicle as vehicle seat .
-
Page 7: Unpacking
CONVAID USER’S GUIDE Setting Up Unpacking Check to see that the following items are included with the chair: • Left and right footplates or one-piece footplate • Hex key (5/32) • Seat cushion • Accessories as ordered Unfolding Fig . 1 Safari Tilt Step 1 Unfasten closure strap . - Page 8 CONVAID USER’S GUIDE Fig . 4 Fig . 5 Step 4 Push down with your Step 5 Attach the seat foot on therear lock brace cushion by pushing firmly into until it is in the the back of seat, then pressing locked position .
-
Page 9: Folding
CONVAID USER’S GUIDE Folding Fig . 11 Step 2 Flip up armrests . Fig. 11 Fig . 10 Step 1 Place foot on rear lock brace and bring the chair to the most upright position (until you hear a “click”) . Fig. 10 Fig . - Page 10 CONVAID USER’S GUIDE Fig . 15 Fig . 16 Step 5 up on center of brace with Step 6 Lean chair back on push foot . Fig. 15 handlesand lower chair to ground . Walk to front of chair and push down on tubing above front tires until chair is folded .
-
Page 11: Tilt And Recline
CONVAID USER’S GUIDE Tilt and Recline To Tilt: If chair has both tilt & recline options, release lock by squeezing trigger on left handle . Tilt to desired angle and release triggers . If chair has tilt only, release lock by squeezing trigger on both handles . -
Page 12: Seat Back Height
CONVAID USER’S GUIDE Fitting Guide Convaid’s lightweight, folding chairs are designed to be more than just a convenient chair. Order the correct size chair by first determining the user’s height, weight and seating measurements. Properly fitted, Convaid chairs will provide years of comfortable use. As the user grows, refer back to this Fitting Guide to adjust the dimensions of the chair . -
Page 13: Seat Depth
CONVAID USER’S GUIDE Seat Depth Measure from the most posterior portion of the buttocks to the back of the knee . Subtract from that measurement 1-2” to allow adequate clearancebetween the seat and the back of the knee . Fig. 23 Remove seat cushion from seat fabric . -
Page 14: Seat-To-Back Angle Adjustment
CONVAID USER’S GUIDE Seat-to-Back Angle Adjustment Partially fold the chair to relieve fabric tension . To change, remove bolt and remount the seat tube using the hole provided in the seat back tube . Fig. 27 90°- lower hole 95°- upper hole Note: Be sure to replace the bolt, washers and nut in the same order as removed . -
Page 15: Three-Point Positioning Belt
CONVAID USER’S GUIDE Positioning Guide Convaid offers a wide variety of supports to help properly position the user . Note: The user must be fitted correctly into the chair to achieve optimal posture and comfort. Three-Point Positioning Belt The three-point positioning belt is standard . Adjust so the user stays securely in position . -
Page 16: Full Torso Swing-Away Vest Support
CONVAID USER’S GUIDE Full Torso Swing-Away Support Vest Adjustable support vest keeps user in place comfortably and securely . Helps maintain midline seating position and prevent forward slumping . The vest is attached to the chair with straps that wrap around the seat back and connect with Velcro , and shoulder ®... -
Page 17: Footplate Depth Adjustment
CONVAID USER’S GUIDE Footplate Depth Adjustment The tilt-in space frame offers adjustable footplate depth . Use a hex key to loosen the two bolts located on the top of the footplate . Slide footplate forward or rearward to desired depth . Retighten bolts . -
Page 18: Foam Wedges
CONVAID USER’S GUIDE Foam Wedge Use wedge to modify seating or positioning or to correct posture . Fig. 38-41 Fig . 38 Fig . 39 Fig . 40 Fig . 41 Angle Adjustable Footplates Angle adjustable footplates can be moved fore and aft, sideways, and rotated vertically and horizontally . -
Page 19: Foot Positioner
CONVAID USER’S GUIDE Foot Positioner The foot positioner holds the foot securely in place . Fig. 46 To attach, thread strap through footplate as shown in Fig. 47, then bolt strap to underside of footplate . Fig . 46 Fig . 47 Footplate Secure Strap The securement strap holds individual footplates together to prevent them from flippimg up and down. -
Page 20: Anatomic Back Support Frame
CONVAID USER’S GUIDE Anatomic Back Support Frame The anatomic back support frame stabilizes the neck and head in a functional position to assist the development of neck and head righting reflexes. The anatomic back frame is optional from the factory and must be ordered with the chair . Removable, reformable stiffeners are located inside the fabric seat back . -
Page 21: Lateral Thigh Support (Adductor)
CONVAID USER’S GUIDE Lateral Thigh Support (Adductor) Pulls thighs together, improving hip alignment and stabilizing seating position . Degree of adduction can be varied and can favor one side . Fold the adductor flaps over the thighs, wrap the straps under and around the armrest tube and attach with buckle . -
Page 22: Padded Headwings
CONVAID USER’S GUIDE Padded Headwings Adjustable padded headwings provide soft foam support for midline positioning . Fig. 57 The padded insert can be attached at any height by wrapping the straps around the frame and securing at the back of the chair . Secure headwing height by tying laces to the chair frame, headrest extension or through the grommet holes in the back of the seat fabric . -
Page 23: Sensiform Seat Cushions
CONVAID USER’S GUIDE Sensiform Seat Cushions The Convaid Sensiform™ Cushions provide excellent support, stability and comfort for a variety of seating and positioning needs . Each cushion is easy to clean and maintain . Fig. 61 Layer 1: The rigid wooden insert creates an excellent foundation for postural support . Layer 2: High quality polyurethane foam resists deterioration, is not temperature sensitive, and retains support for stability and comfort . -
Page 24: Cushion Types
CONVAID USER’S GUIDE Cushion Types Safari Support: General Use Cushion Flat foam with wooden insert . Fig. 62 • Promotes stability and posture control and provides comfort for the user . • Waterfall front eliminates pressure points at the back of the knees . -
Page 25: Fitting Guide
CONVAID USER’S GUIDE Fitting The fitting of the cushion should be done by an experienced clinician. When fitted correctly, the cushion will help provide stable support and promote good posture . Consult the clinician for questions regarding individual needs . While in the seated position, select the cushion size to match the user’s hip width . -
Page 26: Accessories
CONVAID USER’S GUIDE Accessories Upper Extremity Support Surface (Tray) 1 . Depress spring button on underside of armrest until tray mount pops out . Fig. 65 2 . Grasp tray mount and extend until locked into position . You may need to turn the tube slightly to snap the spring button into the hole . -
Page 27: Headrest Cover (Canopy)
CONVAID USER’S GUIDE Headrest Cover (Canopy) Installing Canopy Note: Partially fold chair before installing canopy . 1 . Move rubber spacers to adjust height of the canopy . 2 . Insert into socket rod . Fig. 68 Folding Canopy: 1 . Peel back fringe of canopy . Fig . A 2 . -
Page 28: Transit Models
CONVAID USER’S GUIDE Transit Models All Transport models have been crash tested and performed satisfactorily at 30 mph / 20 g deceleration . Dummy weights as tested: Safari Tilts Model SFT12T ........66lbs / 30kg Model SFT14T . -
Page 29: Fabric Removal
CONVAID USER’S GUIDE WTORS Manufacturers Convaid is a wheelchair manufacturer and does not offer wheelchair tiedown and occupant restraint systems (WTORS). However, products that comply with current WTORS standards can be obtained from the following companies that specialize in crash-tested WTORS: Q’Straint, Sure-Lok, Unwin and Ortho Safe specialize in crash-tested tiedown systems and are in no way associated with Convaid . -
Page 30: Miscellaneous Wheels
CONVAID USER’S GUIDE Miscellaneous Wheels Locking and Unlocking Hand Wheel Locks To lock, pull down on handle . Fig. 73 To release lock, pull up on handle . Fig. 74 Fig . 73 Locked Fig . 74 Unlocked... -
Page 31: Wheel Specifications
CONVAID USER’S GUIDE Specifications Safari Tilt wheels come standard with 6” and 11” solid tires . When ordering replacements, please have the following information available: • Chair model and size • Wheel size • Tire type - ribbed or knobby Pneumatic Tire Sizes: Size: 6”... -
Page 32: Wheel Lock Adjustment
CONVAID USER’S GUIDE Wheel Lock Adjustment Set wheel locks to locked position . Push chair with light pressure on the rear wheels . If wheel rotates, adjust tension by turning the adjustment nut until wheels no longer rotate while locked . Fig. 75 Caution: Wheel lock adjustment should be inspected periodically . -
Page 33: Important Information
CONVAID USER’S GUIDE Important Information Maintenance, Operating & Safety Instructions • READ ALL INSTRUCTIONS BEFORE USING THE PRODUCT • ALWAYS FOLLOW THESE SAFETY INSTRUCTIONS • SAVE SAFETY INSTRUCTIONS FOR FUTURE REFERENCE • For user safety, the seat belt should be fastened at all times . •... - Page 34 CONVAID USER’S GUIDE IMPORTANT INFORMATION • Do not use chair after occupant has outgrown it . • Do not ignore minor malfunctions and maintain the chair in good operating condition . Monitor the wheel locks (brakes) regularly (see maintenance chart) . •...
- Page 35 CONVAID USER’S GUIDE IMPORTANT INFORMATION When going up a curb or step, face forward and tilt the chair back to lift the front wheels over the curb . Move forward and lift the rear wheels over the curb . The Flyer curb clearance is 2 .5”...
- Page 36 CONVAID USER’S GUIDE IMPORTANT INFORMATION Check for functionality and/or damage Weekly Every 3 Every 6 of the following: months months necessary Rims and tires • Wheel lock and hand brakes • Accessories • Front and rear wheel axles • Cleaning & lubricating all moving parts* •...
- Page 37 CONVAID USER’S GUIDE IMPORTANT INFORMATION Cleaning of fabric cover Seat and back upholstery can be easily removed, washed, air dried and reattached to the chair . Use standard detergent to wash fabric . Cushioned parts can also be removed from chair, washed or wiped off with a moist cloth . Before reattaching them to the chair, make sure they are completely dry .
- Page 38 Convaid Service Dealer Please record the Convaid Dealer from which you purchased your chair: Company: _____________________________________________________________________________ Address: ______________________________________________________________________________ Phone: _____________________________Website: __________________________________________ Contact: ______________________________Email: __________________________________________ Serial #: ______________________________________________________________________________ Or contact Convaid Customer Service at 844 US Mobility (844-876-6245) (+1-310-618-0111) or convaidsales .us@etac .com...
-
Page 39: Warranty
. Warranty applicable in USA only, may vary in other countries . Convaid Products, LLC 2830 California Street, Torrance, CA 90503, USA Toll free in the US: 1-844-US-Mobility (844-876-6245) • Phone: (310) 618-0111 • Fax: (310) 618-8811 Email: convaidsales.us@etac.com • International Email: international.convaid.us@etac.com www.etac.us.com UG0700-ENG-Rev.00 2020-02-11 Printed in USA...