Etac / Cross 5 / www.etac.com
Unfolding
•
Push down on one side of the seat frame,
using the whole of the flat of the hand.
•
Do not hold the seat frame tube while
unfolding as there is a risk of pinching
your fingers.
•
Lower the foot supports.
Folding
•
If a bow handle and/or cross brace is
mounted they should be removed.
•
Flip up the foot supports.
•
Lift up the seat.
Rear wheel with quick release
When assembling, always check so that
the quick release button pops out to the
original position.
Anti-tips
•
The anti-tips can be flipped up.
•
Ensure the locking function
works properly when activa-
ting the anti-tip.
•
After any adjustments on your wheelchair, always
ensure that you check the function of the anti-tips.
If necessary to adjust, please contact your dealer or
your Technical Aids Centre.
User manual
Handling
Click!
Click!
22
Click!
Click!
3-7 cm