Table of Contents
Advertisement
Leg supports with foot plates and arm supports/side covers are
delivered unassembled and must be mounted upon delivery.
Unfolding
•
Push one seat post down, with your whole hand
on top of the seat.
•
Do not hold the seat post when unfolding.
•
Fold down the foot plates.
Folding
•
Any drive handle and/or crossbar are
detached/unclipped.
•
Fold up the foot plates.
•
Lift the seat up.
Rear wheels with quick-release axle
When assembling, always make sure that
the quick-release button in the hub springs
out properly. Test by pulling the wheel.
Anti-tip guard
•
The anti-tip guards are foldable in two locking positions. The first
locking position may be required if the anti-tip guard pushes
against the back chassis.
•
When unfolding the anti-tip guard, make sure that the locking pin
snaps in properly.
•
After all adjustments to the chair, the function of the anti-tip guard must be checked.
If the anti-tip guard needs to be adjusted, contact your technical aids centre.
Tilter
is integrated in the frame
8. Installation upon delivery
9. Handling
Click!
11
Etac / Cross 6 / www.etac.com
3-7 cm
Click!
Click!
Advertisement
Table of Contents
