Silencing Alarms - Insulet Omnipod GO User Manual

3 Understanding Pod Lights and Sounds and Alarms
Pod Light
No light

3.5. Silencing Alarms

If a Pod alarm continues unexpectedly,
follow the directions in this section.
To permanently silence a Pod's alarm:
1. If the Pod is on your body,
remove it.
2. Peel back a little bit of the
adhesive tape from the bottom
of the Pod at the square end
(see figure).
3. Locate the alarm shut-off port to
the right of the gold circle. The
alarm shut-off port can be felt
with a fingernail or paper clip as
a soft plastic.
4. Firmly press a paper clip or similar item straight down into the
alarm shut-off port. You need to apply enough force to break a
thin layer of plastic. If an alarm is sounding, the alarm will stop.
50
When the Pod Has Stopped (continued)
Pod Sound
No sound.
What it What to do
means
The Pod you 1. Remove
have been
wearing has
2. Apply
not been
delivering
insulin for
an extended
period of
time. 4 hours
passed since
the Pod
experienced
a Hazard
alarm,
or 12 hours
passed since
the Pod
expired.
Press down
Alarm shut-off
port
Gold circle
Fill port
your Pod.
a new
Pod to
continue
to receive
insulin.
firmly
.